John Breed, Diary and Training diary, item 104

• March 28, 2017 04:13:30 Cheryl Ellsworth

  must be taken before commencing to screw in, to hold

  the breech screw "Square" against the face of the carrier

  with one of the threaded portions of the screw upper

  most, the stamping on the screw being to the rear. Two

  and one quarter turns of the breech screw are required

  in screwing in, the retaining catch being pressed in

  clear of the screw during this operation

  When inserting the trigger, first correctly assemble the

  spring with the projecting ends in the holes for their

  reception in the Part I trigger and bush, then insert

  the collar on the trigger with the recessed portion inner

  most and twist the bush on the trigger until the projection

  on it engages with the recess in the collar. Insert Part I

  trigger with bush, collar, and spring into the left side

  of the gun and engage with "Part II" trigger inserted

  from the rear. Insert keep pin

Description